The GL-C-618WL Elite 4D-EXMU is the four-output member of Gledopto's wired Elite line: the same preconfigured Ethernet and onboard PDM microphone as the six-output 6D, on a board sized for projects that need multiple zones but not six data lines. It drives four digital strips (plus an extra IO13 GPIO for DIY use) from a 5–24V input at 10A per channel and 15A total, protected by a 20A blade fuse. Firmware flashes over USB-C (5V/3A), and chip support is broad — WS2812B, WS2815, SK6812, SM16703 and the RGBCCT WS2805 among them. Ethernet is on by default next to Wi-Fi, so a controller behind a TV or in a rack doesn't hang on signal strength, and a function button on GPIO17 covers power, colour and factory reset.
1 / 8
Gledopto
Gledopto GL-C-618WL Elite 4D-EXMU
Four outputs with Ethernet and a built-in mic — the wired-network Elite without stepping up to six lines.
★ 4.6 / 5from €39.99
See all 1 prices ↓- Chip
- ESP32
- Data outputs
- 4
- Form factor
- Boxed / enclosed
- Wi-Fi
- Yes
- Ethernet
- Yes
- Voltage
- 5V12V24V
- LED protocols
- WS2805WS2811WS2811FWS2812BWS2814AWS2815SK6812SM16703SM16703SP3FL19038FW1935UCS2903B
- Best for
- Multi-zone and audio-reactive installations that want a wired network without six outputs
Pros
- +Four data outputs plus an extra IO13 GPIO for DIY projects
- +Ethernet preconfigured alongside Wi-Fi — no signal dropouts
- +Built-in PDM microphone for sound-reactive effects
- +Wide 5–24V input, 10A per channel and 15A total with a 20A fuse
- +USB-C firmware flashing, broad chip support including RGBCCT WS2805
Cons
- −Four outputs only — step up to the 6D-EXMU for six data lines
- −Controller only — power supply and cabling not included
Where to buy
1 offerAffiliate disclosure: We earn a commission on purchases made through the links below, at no extra cost to you. Prices are indicative and may have changed since last checked.
Gledopto
ShopBest priceOfficial store€39.99View deal
Prices last verified when this page was published — check the shop for the current price and availability.